Saw Products

  M2 M3T1 M42 MATRIX II D6A 3% CR- AISI6150 AISI6135 TRM 84
Element HSS Edge HSS Edge HSS Edge HSS Edge backing backing backing backing backing
C .79-.86 1.00-1.10 1.05-1.10 0.70-0.75 0.45-0.50 0.30-0.35 0.48-0.53 0.30-0.37 0.26-0.32
Mn <0.35 0.20-0.35 0.15-0.30 0.15-0.40 0.60-0.90 0.65-0.80 0.70-0.90 0.60-0.90 0.95-1.10
Cr 3.90-4.40 3.75-4.50 3.50-4.00 3.90-4.40 0.90-1.10 3.00-3.20 0.80-1.10 0.80-1.10 1.90-2.10
Mo 4.75-5.25 6.00-6.50 9.25-9.75 4.75-5.25 0.90-1.10 2.00-2.20 0.40-0.60 0.15-0.36 1.40-1.60
V 1.75-2.05 2.40-2.80 1.00-1.30 0.80-1.10 0.08-0.15 0.30-0.40 0.15-0.25 0.15-0.25 0.20-0.80
W 6.00-6.75 6.00-6.50 1.30-1.70 0.80-1.10         1.40-1.60
Co     7.75-8.25 7.75-8.25          
Ni         0.50-0.70 0.30-0.90      
Cu         <0.20       0.20
Al 0.05-0.10 0.05-0.10 0.03-0.10 0.05-0.10 0.05-0.10 0.40-0.80 0.04-0.10 0.04-0.10 0.04-0.80
Si 0.15-0.35 0.20-0.35 0.20-0.35 0.15-0.30 0.10-0.25 0.30-0.45 0.20-0.35 0.15-0.30 0.30-0.50
S <0.015 <0.010 <0.010 <0.010 <0.007 <0.010 <0.010 <0.010 <0.004
P <0.025 <0.025 <0.025 <0.025 <0.015 <0.015 <0.025 <0.025 <0.020

NOTE: Theis will be pleased to work with customers in developing new grades of HSS edging and backing material.

Sizes and Tolerances
Many sizes are available. The following typical sizes available with respect to saw types:

Saw Types with Thickness / Width Tolerances

Saw Type Thickness   Width   Edge Width
  inch (mm)   inch (mm)   inch (mm)
Handhack 0.024 (0.61)   0.500 (12.7)   0.040 (1.02)
Powerhack 0.050 (1.30)   1.125 (28.6)   0.156 (4.00)
              0.186 (4.73)
  0.088 (2.23)   1.075 (27.3)   0.250 (6.35)
Hole 0.050 (1.27)   1.500 (38.1)   0.187 (4.75)
Band 0.025 (0.63)   0.250 (6.35)   0.040 (1.02)
  0.042 (1.07)   1.250 (31.75)   0.060 (1.52)
Reciprocating 0.035 (0.89)   0.750 (19.0)   0.040 (1.02)
Saber 0.050 (1.27)   0.750 (19.0)   0.060 (1.52)
Portaband 0.020 (0.51)   0.500 (12.7)   0.040 (1.02)

Typical tolerances:
Width: ±0.002" (±0.051 mm)                      
Thickness: ±0.0010" (±0.025 mm)
Camber: <0.180" in 6'
  (<4.6 mm in 1.83 m)
Flatness: <0.001"/1" of width
  (<0.025 mm/25.4 mm of width)
Wedge/crown <0.001"/1" of width
  (<0.025 mm/25.4 mm of width)
Dog legs (TIR) <0.020" in 20.0"
  (<0.50 mm in 508 mm)

Coils
Theis will meet customer specifications for coil I.D., O.D., length, matched coils, color code, butt weld and packaging.

Back to Contents